Bodyguard T240P Owner's Manual download pdf (Page 15)

T240 – T240P – T240C TREADMILLS OWNER’S MANUAL

To use Learn Program, enter the Settings Menu (see Section 2.1).

1. When the screen opens, the prompt word “NEW” invites you to create a new program. Press the JustGo

key to accept.

2. You will then be prompted to enter a speed level for Segment No. 1. You can vary the speed for this segment using the

INCREASE/DECREASE SPEED keys. Speed variations will appear in the upper right-hand side of the screen, as well as

graphically at the center of the screen. Once the speed has been adjusted, press the JustGo

key to accept.

3. You will then be prompted to enter an incline level for Segment No. 1. Vary the incline level using the INCREASE/DECREASE

INCLINE keys. Incline variations will appear in the upper left-hand side of the screen as well as graphically at the center of the

screen. Once the incline has been adjusted, press the JustGo

key to accept. You will then automatically go to the next

SEGMENT.

4. Repeat this procedure until the entire profile (20 segments) is completed. Your program will be saved under the name "CUST.

X", X being the next available box. If all the boxes have been used, you will have to modify an existing program to your specific

needs, following the above procedure.

5. After all 20 segments have been completed, you will be shown under what name the program has been saved in memory. To

use the published programs in the Learn Program option, select LEARN PROGRAM from the programs available, and then select

the desired custom programs.

NOTE – You can learn two (2) programs with the T240 treadmill and four (4) programs with the T240P–T240C treadmills

2.12 Pause Duration

To modify the pause duration, enter the Settings Menu (see Section 2.1).

1. Select the PAUSE DURATION IN MINUTES option and press the JustGo

key to access it.

2. You can choose a pause time between 1 and 30 minute(s) using the INCREASE/DECREASE INCLINE keys

3. Press the JustGo

key to accept the change.

2.13 Big Numbers Option

You can select the BIG NUMBERS option to display five (5) parameters in “BIG NUMBER” for the main screen during your

exercise instead of the speed or incline profiles that are normally displayed.

To choose the BIG NUMBERS option, enter the Settings Menu (see Section 2.1).

1. Select the BIG NUMBERS option and then press the JustGo

key to accept.

2. Select the option you wish to appear on-screen (DEACTIVATE, ALL, TIME, DISTANCE, CALORIES, SPEED, HEART RATE) by

pressing the INCREASE/DECREASE SPEED key.

3. Press the JustGo

key to accept. The information will now be displayed according to your selection.

NOTE–To return to the speed and incline profiles, select the “DEACTIVATE” and press the JustGo

key to accept.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 37 38

No comments

Bodyguard T240P Owner's Manual Page 15